Katool KT-AM120SD 12000 lbs Two Post Car Lift
The Katool KT-AM120SD is a two-post vehicle lift rated for 12,000 lb total capacity, configured with asymmetric arm geometry that positions the vehicle behind the columns and a clear-floor design that routes hydraulic lines through an overhead crossbar for unobstructed under-vehicle access.
Vertical range supports both ground-level work and full-height under-vehicle access: minimum pad height drops to 4.25–4.33 inches for lower-clearance vehicles, while maximum lifting height reaches approximately 70.87 inches. A single-point lock release disengages both column safety locks from one control lever, supporting fast operational cycle times.
The hydraulic system is 220V single-phase standard, with 110V single-phase available as an optional configuration. Installation requires a minimum 5.9 inch (150 mm) concrete pad rated to 3,000 PSI. Compatible with cars, trucks, and SUVs within rated per-arm load distribution.
Features
- 12,000 lb total lifting capacity
- Asymmetric arm geometry positions vehicle behind columns for improved door clearance
- Clear-floor design with overhead crossbar for unobstructed under-vehicle access
- Single-point lock release disengages both column safety locks from one lever
- Low minimum pad height (4.25" to 4.33") for lower-clearance vehicles
- Maximum lifting height approximately 70.87" for full-stand under-vehicle work
- 220V single-phase hydraulic system standard (110V single-phase available as optional)
- Heavy-duty construction for daily commercial shop operation
- Requires minimum 5.9" (150 mm) concrete pad rated to 3,000 PSI
- Compatible with cars, trucks, and SUVs
What's Included
- 2× Lift columns (drive-side and idler-side)
- 1× Overhead crossbar with hydraulic hoses and single-point lock release cable
- 4× Asymmetric swing arms (2 short front, 2 long rear, with telescoping ends)
- 4× Screw-on rubber lift pads
- Extension support adapter set
- 1× Hydraulic power unit with motor (220V single-phase standard)
- Hydraulic hoses and fittings
- Concrete anchor bolts and mounting hardware
- Operator's manual and installation guide
Specifications
| PRODUCT INFORMATION | |
|---|---|
| Model | KT-AM120SD |
| Brand | Katool Automotive Equipment |
| Product Type | Two-post lift |
| Lift Configuration | Clear-floor, asymmetric arms |
| CAPACITY | |
| Lifting Capacity | 12,000 lbs |
| Max Lifting Height | 70.87" (1,800 mm) |
| Min Lifting Height | 4.25" to 4.33" (110 mm) |
| DIMENSIONS | |
| Overall Height | 143.7" to 144" (3,650 mm) |
| Drive-Through Clearance | 94" |
| POWER | |
| Motor Power | 4.0 HP |
| Power Requirements | 220V, 60 Hz, 1 phase |
| SAFETY | |
| Locking Positions | 12 |
| PHYSICAL | |
| Product Weight | 1,369 lbs |
