Katool KT-H105 10000 lbs Two Post Car Lift
The Katool KT-H105 is a two-post vehicle lift rated for 10,000 lb total capacity, configured with a base-plate design that routes hydraulic lines and synchronization cables through a floor crossbar. This reduces vertical ceiling clearance requirements compared to overhead-style two-post lifts.
The mechanism uses dual hydraulic chain-drive cylinders powered by a 220V/60Hz/1-phase hydraulic system, with a 110V/60Hz/1-phase option available as a paid add-on. Manual safety release controls are located on both columns. Rubber door pad protection prevents vehicle door contact with column faces, and the unit ships with screw-on pad and +100 mm extension support adaptors.
Installation requires a minimum 5.9 inch (150 mm) concrete pad rated to 3,000 PSI. CE certified and tested to 115% dynamic and 150% static load standards. Per-arm load distribution should be verified against vehicle axle weights before each lift cycle.
Features
- 10,000 lb (4,500 kg) total lifting capacity
- Base-plate design for reduced ceiling clearance requirements
- Dual hydraulic chain-drive cylinders for synchronized, balanced lifting
- Manual safety release on both columns for technician-accessible lowering
- Rubber door pad protection prevents door damage during vehicle entry/exit
- Screw-on pad and +100 mm extension support adaptors included
- CE certified with 115% dynamic and 150% static load testing
- 220V/60Hz/1-phase hydraulic system (110V/60Hz/1-phase available as add-on)
- Requires minimum 5.9" (150 mm) concrete pad rated to 3,000 PSI
- Compatible with cars, SUVs, and light trucks within rated capacity
What's Included
- 2× Lift columns (drive-side and idler-side)
- 1× Base-plate floor crossbar with hydraulic hoses and synchronization cables
- 4× Swing arms with telescoping ends
- 4× Screw-on rubber lift pads
- +100 mm extension support adaptor set
- 1× Hydraulic power unit with motor (220V/60Hz/1-phase standard)
- Hydraulic hoses and fittings
- Rubber door protection pads
- Concrete anchor bolts and mounting hardware
- Operator's manual and installation guide
Specifications
| CAPACITY | |
|---|---|
| Lifting Capacity | 10,000 lbs (4,500 kg) |
| Max Lifting Height | 70.8" (1,800 mm) |
| Min Height | 3.9" (100 mm) |
| DIMENSIONS | |
| Overall Height | 110.9" (2,818 mm) |
| Overall Width | 140.4" (3,565 mm) |
| Outside Column | 124.8" (3,170 mm) |
| Inside Column | 110.2" (2,800 mm) |
| Drive-Through Clearance | 98.4" (2,500 mm) |
| ARM REACH | |
| Front Arm Reach (Min) | 29.5" (750 mm), 2 stages |
| Front Arm Reach (Max) | 46" (1,170 mm), 2 stages |
| Rear Arm Reach (Min) | 29.5" (900 mm), 2 stages |
| Rear Arm Reach (Max) | 49.2" (1,480 mm), 2 stages |
| POWER | |
| Motor | 220 VAC, 60 Hz, 1 phase, 2.2 kW |
| PHYSICAL | |
| Net Weight | 570 kg |
