Katool KT-H115Z 11000 lbs Two Post Car Lift
The Katool KT-H115Z is a two-post vehicle lift rated for 11,000 lb total capacity, built around a heavy-duty reinforced steel structure with a base-plate design that routes hydraulic lines and synchronization cables through a floor crossbar. The base-plate configuration reduces ceiling clearance requirements compared to overhead-style lifts.
The lifting mechanism uses dual hydraulic chain-drive cylinders for synchronized column travel across a symmetric arm geometry. Low-profile swing arms improve clearance for ground-effect vehicles, sports cars, and lowered vehicles where standard-height arms cannot fit under the rocker panel. Manual safety release controls are located on both columns.
The unit ships with screw-on pads and +100 mm extension adapters. CE certified and tested to 115% dynamic and 150% static load standards. Compatible with passenger vehicles, light trucks, and SUVs within rated per-arm load limits.
Features
- 11,000 lb total lifting capacity
- Base-plate design for reduced ceiling clearance requirements
- Dual hydraulic chain-drive cylinders for synchronized, balanced lifting
- Symmetric arm design for even weight distribution and flexible positioning
- Low-profile swing arms for ground-effect, sports, and lowered vehicles
- Heavy-duty reinforced steel construction for daily commercial use
- Manual safety release on both columns for technician-accessible lowering
- Screw-on pads and +100 mm extension adapters included
- CE certified with 115% dynamic and 150% static load testing
- Compatible with passenger vehicles, light trucks, and SUVs
What's Included
- 2× Lift columns (drive-side and idler-side)
- 1× Base-plate floor crossbar with hydraulic hoses and synchronization cables
- 4× Low-profile swing arms with telescoping ends
- 4× Screw-on rubber lift pads
- +100 mm extension adapter set
- 1× Hydraulic power unit with motor
- Hydraulic hoses and fittings
- Concrete anchor bolts and mounting hardware
- Operator's manual and installation guide
Specifications
| CAPACITY | |
|---|---|
| Lifting Capacity | 11,000 lbs (5,000 kg) |
| Max Lifting Height | 70.8" (1,800 mm) |
| Minimum Height | 3.9" (100 mm) |
| DIMENSIONS | |
| Overall Height | 110.9" (2,818 mm) |
| Overall Width | 140.4" (3,565 mm) |
| Outside Column Width | 124.8" (3,170 mm) |
| Inside Column Width | 110.2" (2,800 mm) |
| Drive-Through Clearance | 98.4" (2,500 mm) |
| ARM REACH | |
| Front Arm Reach (Min) | 29.5" (750 mm), 2 stages |
| Front Arm Reach (Max) | 46" (1,170 mm), 2 stages |
| Rear Arm Reach (Min) | 35.4" (900 mm), 2 stages |
| Rear Arm Reach (Max) | 58.2" (1,480 mm), 2 stages |
| POWER | |
| Motor | 220V, 60 Hz, 1 phase, 2.2 kW |
| PHYSICAL | |
| Net Weight | 1,257 lbs (570 kg) |
