Katool KT-H120D 12000 lbs Two Post Car Lift
The Katool KT-H120D is a two-post vehicle lift rated for 12,000 lb total capacity, configured with asymmetric arm geometry that positions the vehicle behind the columns rather than centered. The offset arm reach provides door clearance behind the column line, and the clear-floor layout routes hydraulic lines through an overhead crossbar for unobstructed under-vehicle access.
The mechanical locking system provides multiple intermediate lock positions across the lift cycle, with a single-point lock release that disengages both column locks from one control lever. Adjustable lift arms accept varied vehicle lift-point geometries across cars, light trucks, SUVs, and light-duty commercial vehicles.
Heavy-duty welded steel construction is rated for daily commercial use in high-throughput service environments. Per-arm load distribution should be verified against vehicle axle weights before each lift cycle.
Features
- 12,000 lb total lifting capacity
- Asymmetric arm geometry for vehicle positioning behind columns with improved door clearance
- Clear-floor design with overhead crossbar for unobstructed under-vehicle access
- Mechanical locking system with multiple intermediate lock positions
- Single-point lock release disengages both column locks from one lever
- Adjustable lift arms fit varied vehicle lift-point geometries
- Heavy-duty welded steel construction for daily commercial use
- Compatible with cars, light trucks, SUVs, and light-duty commercial vehicles
- Suitable for professional automotive shops, fleet service centers, and commercial garages
What's Included
- 2× Lift columns (drive-side and idler-side)
- 1× Overhead crossbar with hydraulic hoses and single-point lock release cable
- 4× Asymmetric swing arms (2 short front, 2 long rear, with telescoping ends)
- 4× Screw-on rubber lift pads
- Extension support adapter set
- 1× Hydraulic power unit with motor
- Hydraulic hoses and fittings
- Concrete anchor bolts and mounting hardware
- Operator's manual and installation guide
Specifications
| PRODUCT INFORMATION | |
|---|---|
| Model | KT-H120D |
| Brand | Katool Automotive Equipment |
| Product Type | Two-post vehicle lift |
| Lift Configuration | Asymmetric arms, clear-floor design |
| CAPACITY | |
| Lifting Capacity | 12,000 lbs (5,443 kg) |
| Max Lifting Height | 72" to 74" (varies by setup) |
| Min Pad Height | 4.5" (low profile) approximate |
| DIMENSIONS | |
| Overall Height | 111" (clear-floor) approximate |
| Drive-Through Clearance | 94" approximate |
| POWER | |
| Motor Power | 2 to 3 HP (varies by regional configuration) |
| Power Supply | 220V, 60 Hz, 1 phase (standard) |
| SAFETY | |
| Locking Positions | Multiple mechanical lock levels |
| Safety Features | Dual-locking safety, cable equalization, automatic shut-off |
| CONSTRUCTION | |
| Construction | Heavy-duty structural steel |
| Color | Dark gray and red |
