Katool KT-M120 12000lbs Two Post Car Lift
The Katool KT-M120 is a two-post vehicle lift rated for 12,000 lb (5,500 kg) total capacity, configured in a symmetric clear-floor design with hydraulic lines routed through an overhead crossbar. The expanded capacity supports cars, SUVs, vans, and light- to medium-duty trucks within rated per-arm load limits.
The lifting mechanism uses dual hydraulic chain-drive cylinders for synchronized column travel. Manual safety release controls sit on both columns, with an overhead safety shutoff bar preventing over-travel. Rubber door pads reduce door-edge damage during entry, and integrated guardrails are fitted at both column bases.
The unit ships with +30 mm and +120 mm extension support adapters plus a built-in tool tray for accessory storage. The clear-floor layout provides unobstructed under-vehicle access for transmission, exhaust, brake, suspension, and alignment service. CE certified and tested to industry-standard dynamic and static load benchmarks.
Features
- 12,000 lb (5,500 kg) total lifting capacity
- Symmetric clear-floor design with overhead crossbar for unobstructed under-vehicle access
- Dual hydraulic chain-drive cylinders for synchronized, balanced lifting
- Manual safety release on both columns for technician-accessible lowering
- Overhead safety shutoff bar prevents column over-travel
- Rubber door protection pads reduce door-edge damage during entry
- Integrated foot-protection guardrails at both column bases
- Built-in tool tray for on-machine accessory storage
- Extension support adapters included (+30 mm and +120 mm)
- CE certified to industry-standard dynamic and static load testing
- Compatible with cars, SUVs, vans, and light- to medium-duty trucks
What's Included
- 2× Lift columns (drive-side and idler-side)
- 1× Overhead crossbar with hydraulic hoses, synchronization cables, and safety shutoff bar
- 4× Swing arms with telescoping ends
- 4× Screw-on rubber lift pads
- Extension support adapters (+30 mm and +120 mm)
- 1× Hydraulic power unit with motor
- Hydraulic hoses and fittings
- Rubber door protection pads
- Foot-protection guardrails
- Integrated tool tray
- Concrete anchor bolts and mounting hardware
- Operator's manual and installation guide
Specifications
| PRODUCT INFORMATION | |
|---|---|
| Model | Katool KT-M120 Two-Post Vehicle Lift |
| CAPACITY | |
| Rated Capacity | 12,000 lb (5,500 kg) |
| Max Lifting Height | 70.75" (1,800 mm) approximate |
| Minimum Pad Height | 4.25" (110 mm) approximate |
| DIMENSIONS | |
| Overall Height | 166.75" (4,235 mm) approximate |
| Overall Width | 165.5" (4,204 mm) approximate |
| Inside Column Width | 130" (3,390 mm) approximate |
| Drive-Through Clearance | 117.75" (2,990 mm) approximate |
| ARM REACH | |
| Arm Reach (Front and Rear) | Min 31", Max 51", 2-stage (approximate) |
| POWER | |
| Motor and Power | 220V, 60 Hz, 1 phase (110V available) |
| PHYSICAL | |
| Net Weight | 1,500 lb (680 kg) approximate |
| CERTIFICATIONS | |
| Certifications | CE, ISO-standard load testing compliance (where applicable) |
