Triumph 8,000 lb Four Post Lift – Includes Free Liftgate Service | NSS8X-1

Triumph NSS-8 X1 8,000 lb 4-Post Storage & Service Lift — Lift-Gate Delivery

The Triumph NSS-8 X1 Easy Park is an 8,000 lb four-post lift built to do two jobs in the same garage footprint: park a second vehicle in the air for storage, or raise one car to a comfortable working height for service. Lift height tops out at 72", with 69" of working height under the runway, so a passenger car parks cleanly underneath while you walk through the bay without ducking. Ships with a caster kit, jack tray, and three drip trays, runs on standard 110V household power, and is built on a design that's been in continuous service for over 20 years.

Why It's Different: The NSS-8 X1 is engineered for lift-gate delivery — it ships in two crates rather than one heavy pallet, so the freight carrier can unload it at your location with a standard lift gate. No forklift, crane, or off-loading equipment required on your end. The runways and crossrails use bolted reinforcement plates at the assembly seams, giving the same load path as a one-piece factory weld while shipping flat enough for two people to handle.

Best For: Home garages and home shops that want both vertical storage and service capability for sedans, SUVs, and mid-size trucks — and buyers who don't have a forklift to unload a traditional single-pallet lift.

⚠️ Measure before ordering — overall length 175", overall width 106", overall height 84", lift height 72", under-runway 69". Tall SUVs and lifted trucks should be measured against the 69" under-runway clearance before purchase.

⚠️ Concrete: install on adequate reinforced concrete per the manufacturer's specifications. Improper concrete can cause serious injury or death.

⚠️ Operate safely: never exceed the 8,000 lb rated capacity, center and balance the vehicle before lifting, and confirm the locks have engaged before working underneath.

Features

• 8,000 lb capacity — handles most passenger cars, SUVs, and mid-size trucks
• Dual-purpose 4-post design — vertical storage or raise-to-service in one lift
• 72" lift height / 69" under-runway clearance — park a car underneath and walk through without ducking
• Reinforced runway and crossrail construction — bolted steel reinforcement plates at the assembly joints match a one-piece weld's load path
• 10-position automatic locking — locks engage automatically as the lift rises
• Single-point lock release — pull one handle and the whole lift descends evenly instead of corner-by-corner
• Caster kit included — two people can roll the assembled lift across the garage floor
• Jack tray included — drops into the runway gap for a bottle or floor jack to lift one end
• Three drip trays included — sit under the upper vehicle's drivetrain to catch oil, coolant, or transmission fluid
• Lift-gate delivery — ships in two crates, no forklift required to unload
• Standard 110V single-phase power — household garage circuit, no wiring upgrade
• 40-second lift time from full down to full up
• Compatible with the optional Triumph SJ-35 rolling bridge jack (sold separately)
• Backed by Triumph's 1-year parts warranty

Specifications

What's Included

• Four lifting columns with bolt-down base plates
• Two diamond-plate runways with reinforcement at the assembly joints
• Two reinforced crossrails
• Hydraulic power unit (110V)
• Approach ramps
• Caster kit for rolling the assembled lift
• Jack tray (for use with a bottle or floor jack)
• Three drip trays
• Cables, hoses, hardware, and assembly manual